horizontal fan coil unit

horizontal fan coil unit including  horizontal concealed fan coil unit and Horizontal Surface Mounted Fan Coil Unit

The FP-has horizontal concealed fan coil unit

Optional remote control

Fp-hc horizontal concealed fan coil unit (bellows, rear return air outlet, lower return air outlet)

Outlet

condensate outlet

rear return air outlet

Water inlet

lower return air outlet

Size of Fp-hc horizontal concealed fan coil unit

model size	34	51	68	85	105	136	170	204	238
Total length（A）	740	840	940	1040	1140	1440	1640	1840	1940
hole for hoist (B)	520	620	740	840	940	1190	1390	1540	1740
Air Outlet (C)	480	580	700	800	900	1150	1350	1500	1700
return air inlet (D)	500	600	720	820	920	1170	1370	1520	1720
weight Kg	12	14	16	18	20	25	29	32	35
Weight with return bellows kg	15	17	20	22	23	30	34.5	38	42

 

FP-HC ultra-thin horizontal concealed fan-coil unit

Model Size	34	51	68	85	102	136	170
Total length（A）	840	940	1040	1140	1240	1440	1640
hole for hoist (B)	570	670	790	890	990	1240	1440
Air Outlet (C)	530	630	750	850	950	1200	1400
return air inlet (D)	550	650	770	870	975	1220	1420

 

160 series luxury ultra-thin fan coil

Model Size	51	68	85	102	136
Total length（A）	840	940	1040	1140	1440
hole for hoist (B)	610	730	830	930	1180
Air Outlet (C)	580*80	700*80	800*80	900*80	1150*80
return air inlet (D)	580*120	700*120	800*120	900*120	1150*120
Dimensions	840*450*160	940*450*160	1040*450*160	1140*450*160	1440*450*160

Note:

1. 160 series ultra-thin horizontal concealed fan-coil bottom return air and rear return air can be replaced by themselves, and automatic induction lift pumps are added according to the difficulty of installation and drainage.
2. The control system has floor heating linkage, host linkage, 485 communication protocol, and wifi function.

 

FP-HO Horizontal Surface Mounted Fan Coil Unit

Model Size	34	51	68	85	102	136	170	204	238
A	830	930	1050	1150	1250	1550	1700	1850	2050
B	480	580	700	800	900	1150	1350	1500	1700
weighgt Kg	39	45.5	51	60	66	70	77	85	92

 

Fan coil

Overview

The FP series fan-coil air conditioner is mainly composed of a fan, a motor, a heat exchanger (coil), a condensate tray, a shell, and a controller. It is suitable for centralized air-conditioning systems. Due to the low noise and flexible temperature adjustment characteristics of the fan coil produced by our company, it is widely used in hotels, guesthouses, apartments, restaurants, hospitals, commercial office buildings, and other places.

 

Model meaning and description

Note:

1. High static pressure unit refers to the static pressure at the outlet of the horizontal concealed unit which is 30Pa or 50Pa;
2. Measurement of cooling capacity under nominal conditions: indoor dry bulb temperature 27C, wet bulb temperature 19.5°C;
3. Heat measurement under nominal conditions: the indoor dry bulb temperature is 21℃, and the water supply is the same as the flow under nominal conditions;
4. Water resistance refers to the water resistance at the rated flow;
5. The input power refers to the input power at high-end air volume.

 

For example FC51-HC -R

Water inlet method code

Left style: L

Right style: R

Model code:

Horizontal concealed installation: HC

Horizontal opening installation: HO

Vertical concealed installation: VC

Vertical opening installation: VO

Wall-mounted: WM

Column type: CT

Nominal air volume: 10 times the specification figure

Product code: Indicates fan coil

Note:

The distinction between left and right styles: When looking at the air outlet of the fan coil, the lleft-hand side of the piping is the left style, and vice versa when it is the right style.

 

The core advantage of the product

1. Beautiful appearance and corrosion resistance: The galvanized sheet produced by Baogang, which is free of spangles, and the surface is not easy to be oxidized and has strong corrosion resistance. No welds, the overall appearance is beautiful and generous. The slope of the water pan is designed to be non-condensing. The water pan is formed by a one-time integral stamping process, with a sloped water outlet, and both sides of the steel plate are pickled and phosphate, and then electrostatically sprayed to prevent water leakage. The surface is covered with flame-retardant insulation material to completely prevent condensation on the surface.
2. High heat exchange efficiency: the coil adopts seamless red copper tube string aluminum fin structure, the aluminum sheet adopts louver open skylight type slotted fin, the copper tube diameter is 9.52, and high-quality hydrophilic aluminum foil is selected. The tube is expanded hydraulically or mechanically to ensure that the aluminum sheet is tightly combined with the copper tube, and the heat exchange efficiency is increased by 10%. The unit test pressure is 1.6Mpa to ensure no leakage.
3. Ultra-low noise: The core component of the coil adopts a hot-dip galvanized multi-blade centrifugal fan that conforms to the principle of aerodynamics. After strict dynamic and static balance testing, the unit runs smoothly and the noise is lower than the national standard.
4. 80,000 hours of operation without failure: the motor adopts 110 type 24-slot copper core motor, the motor bearing adopts moisture-proof sealing treatment, no need to replenish lubricating oil, equipped with overheating protection device, low-temperature rise, no special circumstances, stable operation of the motor without failure.
5. The DC variable frequency fan coil adopts a DC brushless motor, and its noise is close to perfect when running at low speed, and the operating power is 1/3 of the ordinary fan coil. Random configuration brand thermostat, intelligent control, and monitoring of indoor temperature and humidity.

 

Main parameters of fan coil air conditioner

Model comparison		British model				FC200			FC300		FC400	FC500	FC600	FC800	FC1000	FC1200	FC1400
		standard modle				FP-3.5			FP-5.0		FC- 6.3 7.1	FP-8	FP-10	FP-12.5 14	FP-16	FP-20	PF-25
		Gb model				FP-34			FP-51		FP-65	FP-85	FP-102	FP-136	FP-170	FP-204	FP-238
Air volume M3/H		High				340			510		680	850	1020	1360	1700	2040	2380
		Middle				255			383		510	638	765	1020	1275	1530	1785
		low				170			255		340	425	510	680	850	1020	1190
Cooling capacity W		High				1800			2700		3600	4500	5400	7200	9000	10800	12800
		Middle				1620			2440		3290	4120	4850	6550	8190	9730	11580
		low				1310			2010		2650	3320	3900	5300	6610	7860	9350
Heat supply W		High				2700			4050		5400	6750	8100	10800	13500	16200	18900
		Middle				2350			3520		4530	6040	6850	9260	11750	14140	16360
		low				1620			2470		3130	4170	4740	6500	8180	9710	11290
Cold water supply temperature						7℃-12℃
Hot water supply temperature						60℃
power supply						AC110-220V/50HZ
heat exchanger		type				Copper tube string aluminum sheet, sheet pitch 2.2mm
		Three-row water supply KG/H				324			482		655	814	936	1276	1602	1915	2178
		Water resistance KPa				30			30		30	30	40	40	40	40	50
		Operating pressure				1.6MPa
Low static pressure unit			input power W				37			52	62	76	96	134	152	189		228
			Motor Power W				8			12	18	22	32	20×2	25×2	35×2		42×2
High static pressure unit	Static pressure 30Pa				input power W			44		59	72	87	108	156	174	212		253
					Motor Power W			40		18	22	30	40	25×2	35×2	42×2		60×2
	Static pressure 50Pa				input power W			49		66	84	100	118	174	210	250		300
					Motor Power W			16		22	30	40	50	35×2	42×2	60×2		75×2
Number of fans						1				2	2	2	2	3	4	4		4
Noise dB(A)				Low static pressure unit				≤37		≤39	≤41	≤43	≤45	≤46	≤48	≤50		≤52
				High static pressure 30Pa				≤40		≤42	≤44	≤46	≤47	≤48	≤50	≤52		≤54
				High static pressure 50Pa				≤42		≤44	≤46	≤47	≤49	≤50	≤52	≤54		≤56
Specification of connecting pipe				Inlet and outlet pipes				ZG3/4 internal three condensate
				Condensate pipe				ZG3/4 External thread