Focus on central air-conditioning end units

en English▼
X
ar Arabicnl Dutchen Englishfr Frenchde Germanit Italianpt Portugueseru Russianes Spanish

中文站

Fp-kmq card type four wind ultra-thin

Category
Ask for a Quote

Product details

Fp-kmq card type four wind ultra-thin

parameter list

Model FP-34KMQ FP-51KMQ FP-68KMQ FP-85KMQ FP-102KMQ FP-136KMQ FP-170KMQ FP-204KMQ FP-238KMQ FP-289KMQ
blowing rate H M3/h 340 510 680 850 1020 1360 1700 2040 2380 2890
M 280 390 520 640 790 1030 1290 1500 1800 2100
L 180 260 350 430 520 690 860 1032 1200 1600
Rated refrigerating capacity KW 2.0 2.7 3.7 5.0 5.6 7.1 9.1 11.0 12.6 15.3
Rated heat capacity KW 2.8 4.2 5.6 7.0 8.4 11.2 13.9 16.7 19.5 23.7
Water flow L/h 345 520 640 860 970 1260 1710 1920 2210 2640
The water resistance kPa 7 9 11 16 18 19 17 19 22 36
The water capacity L 1.64 1.64 1.64 2.03 2.03 2.03 2.88 2.88 2.88 2.88
The noise dB(A) 37 39 41 43 45 46 47 50 52 57
The input power W 37 52 62 76 96 132 152 189 220 330
Rated refrigerating capacity A 0.16 0.23 0.28 0.34 0.43 0.59 0.67 0.84 0.98 1.43
Rated heat capacity V/Ph/Hz 200V/1P/50HZ
Control mode Remote control
Machine size

（L×P×H）

 Mm 580×580×250 705×705×290 822×822×293 960×960×290
Panel size

（L×P×H）

 Mm 680×680×30 830×830×30 950×950×30 1140×1140×30
Net weight Kg 21.5 29 39 52
Pipe size In in ZG3/4’’
Out in ZG3/4’’
  1. Rated air volume refers to the air volume when the static pressure of the mouth is 0Pa
  2. Cooling working parameters: dry bulb temperature of inlet air is 27℃, wet bulb temperature is 19.5℃, inlet water temperature is 7℃, backwater temperature is 12℃

3. Heating working parameters: inlet air dry bulb temperature is 20℃, inlet water temperature is 60℃, backwater temperature is 50℃.

 

Fp-kmd card type four blower coil unit (ABS) panel

Size data:

Size

model

 34 51 68 85 102 136 170 204 238
A 650 650 650 850 850 850 950 950 950
B 650 650 650 850 850 850 950 950 950
L×S 590×590 750×752 822×822
Hole size of suspended ceiling 635×410 693×608 757×658

 

Fan coil

Overview

The FP series fan-coil air conditioner is mainly composed of a fan, a motor, a heat exchanger (coil), a condensate tray, a shell, and a controller. It is suitable for centralized air-conditioning systems. Due to the low noise and flexible temperature adjustment characteristics of the fan coil produced by our company, it is widely used in hotels, guesthouses, apartments, restaurants, hospitals, commercial office buildings, and other places.

 

Model meaning and description

Note:

  1. High static pressure unit refers to the static pressure at the outlet of the horizontal concealed unit which is 30Pa or 50Pa;
  2. Measurement of cooling capacity under nominal conditions: indoor dry bulb temperature 27C, wet bulb temperature 19.5°C;
  3. Heat measurement under nominal conditions: the indoor dry bulb temperature is 21℃, and the water supply is the same as the flow under nominal conditions;
  4. Water resistance refers to the water resistance at the rated flow;
  5. The input power refers to the input power at high-end air volume.

 

For example FC51-HC -R

Water inlet method code

Left style: L

Right style: R

Model code:

Horizontal concealed installation: HC

Horizontal opening installation: HO

Vertical concealed installation: VC

Vertical opening installation: VO

Wall-mounted: WM

Column type: CT

Nominal air volume: 10 times the specification figure

Product code: Indicates fan coil

Note:

The distinction between left and right styles: When looking at the air outlet of the fan coil, the left-hand side of the piping is the left style, and vice versa when it is the right style.

 

The core advantage of the product

  1. Beautiful appearance and corrosion resistance: The galvanized sheet produced by Baogang, is free of spangles, and the surface is not easy to be oxidized and has strong corrosion resistance. No welds, the overall appearance is beautiful and generous. The slope of the water pan is designed to be non-condensing. The water pan is formed by a one-time integral stamping process, with a sloped water outlet, and both sides of the steel plate are pickled and phosphphosphatethen electrostatically sprayed to prevent water leakage. The surface is covered with flame-retardant insulation material to completely prevent condensation on the surface.
  2. High heat exchange efficiency: the coil adopts seamless red copper tube string aluminum fin structure, the aluminum sheet adopts louver open skylight type slotted fin, the copper tube diameter is 9.52, and high-quality hydrophilic aluminum foil is selected. The tube is expanded hydraulically or mechanically to ensure that the aluminum sheet is tightly combined with the copper tube, and the heat exchange efficiency is increased by 10%. The unit test pressure is 1.6Mpa to ensure no leakage.
  3. Ultra-low noise: The core component of the coil adopts a hot-dip galvanized multi-blade centrifugal fan that conforms to the principle of aerodynamics. After strict dynamic and static balance testing, the unit runs smoothly and the noise is lower than the national standard.
  4. 80,000 hours of operation without failure: the motor adopts a 110 type 24-slot copper core motor, the motor bearing adopts moisture-proof sealing treatment, no need to replenish lubricating oil, equipped with overheating protection device, low below-temperature special circumstances, stable operation of the motor without failure.
  5. The DC variable frequency fan coil adopts a DC brushless motor, and its noise is close to perfect when running at low speed, and the operating power is 1/3 of the ordinary fan coil. Random configuration brand thermostat, intelligent control a, nd mo, monitoring of indoor temperature and humidity.

 

Main parameters of fan coil air conditioner

Model comparison British model FC200 FC300 FC400 FC500 FC600 FC800 FC1000 FC1200 FC1400
standard modle FP-3.5 FP-5.0 FC- 6.3

7.1

 FP-8 FP-10 FP-12.5

14

 FP-16 FP-20 PF-25
Gb model FP-34 FP-51 FP-65 FP-85 FP-102 FP-136 FP-170 FP-204 FP-238
Air volume

M3/H

 High 340 510 680 850 1020 1360 1700 2040 2380
Middle 255 383 510 638 765 1020 1275 1530 1785
low 170 255 340 425 510 680 850 1020 1190
Cooling capacity

W

 High 1800 2700 3600 4500 5400 7200 9000 10800 12800
Middle 1620 2440 3290 4120 4850 6550 8190 9730 11580
low 1310 2010 2650 3320 3900 5300 6610 7860 9350
Heat supply

W

 High 2700 4050 5400 6750 8100 10800 13500 16200 18900
Middle 2350 3520 4530 6040 6850 9260 11750 14140 16360
low 1620 2470 3130 4170 4740 6500 8180 9710 11290
Cold water supply temperature 7℃-12℃
Hot water supply temperature 60℃
power supply AC110-220V/50HZ
heat exchanger type Copper tube string aluminum sheet, sheet pitch 2.2mm
Three-row water supply KG/H 324 482 655 814 936 1276 1602 1915 2178
Water resistance KPa 30 30 30 30 40 40 40 40 50
Operating pressure 1.6MPa
Low static pressure unit input power W 37 52 62 76 96 134 152 189 228
Motor Power W 8 12 18 22 32 20×2 25×2 35×2 42×2
High static pressure

unit static

 Static pressure 30Pa input power W 44 59 72 87 108 156 174 212 253
Motor Power W 40 18 22 30 40 25×2 35×2 42×2 60×2
Static pressure 50Pa input power W 49 66 84 100 118 174 210 250 300
Motor Power W 16 22 30 40 50 35×2 42×2 60×2 75×2
Number of fans 1 2 2 2 2 3 4 4 4
Noise dB(A) Low static pressure unit ≤37 ≤39 ≤41 ≤43 ≤45 ≤46 ≤48 ≤50 ≤52
High static pressure 30Pa ≤40 ≤42 ≤44 ≤46 ≤47 ≤48 ≤50 ≤52 ≤54
High static pressure 50Pa ≤42 ≤44 ≤46 ≤47 ≤49 ≤50 ≤52 ≤54 ≤56
Specification of connecting pipe Inlet and outlet pipes ZG3/4 in three condensate
Condensate pipe ZG3/4 External thread

 

Related products

Professional supplier of air conditioning equipment and accessories in China

Company

Product

Connect

Facebook-f Youtube Linkedin

Ask For A Quick Quote

We will contact you within 1 working day.